I. Assembly method
Real samples of components are placed on the assembly platform with a ratio of 1:1. Then, according to the position of the parts in the sample, they are assembled into components separately.
Scope of use
Small batch structure assembly such as truss and frame
II. Copying and Assembly Method
Assembly method
One-sided (single-sided) structure is assembled by sample method, and spot welding must be positioned. Then turning over as a replica mould, another one-sided structure is assembled on it, and two round-trip assemblies are made.
Scope of use
Truss Structures with Symmetrical Cross Sections
III. Erect clothing
Assembly method
According to the characteristics of components and the stable position of components, top-down or bottom-up assembly is selected.
Scope of use
Used for stationary, small height structure or large diameter cylinder
IV. Lying down
Assembly method
Assembly of Component Location
Scope of use
It is used for slender members with small section but large length.
V. Membrane Assembly Method
Assembly method
Assembling parts of a component by positioning them in their assembly position with a die
Scope of use
Products with large batches and high precision for manufacturing components
Remarks:
Pay attention to all kinds of processing allowance when arranging assembly lifting die