What are the construction plans for adding layers to steel frame and structure? Steel structure sandwich construction scheme, the so-called steel structure sandwich, generally used in the plant or warehouse steel structure, can play a very good isolation role. The construction scheme and quality requirements of steel clamp vary with different uses. Next, KXD briefly introduces several special construction solutions.
The construction plan of steel structure workshop is to make steel members first, and then install them after the completion of production. This product is suitable for I steel, channel steel, Angle steel, main beam, channel steel, square steel, Angle steel and primary and secondary beams. Can be installed after the floor is installed.
The steel sandwich is laid after welding the long bone. The sandwich area of floor steel structure can be determined by area. When they overlap, pay attention to both sides. The main girders of the steel frame must overlap, not overlap. The bottom plate is fixed on the steel keel with self-tapping nails. The ground is wrapped with profiled steel plate and steel bar, and the concrete floor is cast with high strength, good sound insulation and noise reduction effect, but the weight is slightly heavy. Steel structure construction should also pay attention to anti-corrosion, fire treatment, through different treatment methods to ensure the corresponding performance of each component, steel structure internal interlayer once completed, it is difficult to carry out anti-corrosion treatment. Therefore, the installation of the frame should be treated with anti-corrosion and fire prevention to ensure the installation quality of the steel structure sandwich.
