What are the components of steel structure anticorrosive paint

Jun 11, 2019

Leave a message

The higher the content of kaolinite in the clay of steel structure anticorrosive paint, the better its quality. The higher the fire resistance of the steel structure anticorrosive paint clay, the wider the sintering and melting range of the clay. The main impurities in clay are alkali metals, alkaline earth metals, oxides of iron and titanium, and some organic compounds. All kinds of oxides play a fusing role, which will reduce the fire resistance of raw materials. Therefore, the lower the content of impurities in clay, especially Na2O and K2O, the higher the fire resistance of steel structure anticorrosive paint. There are many kinds of minerals in clay, but they usually consist of only 5 to 6 minerals. The main mineral is kaolinite. Common impurity minerals are quartz, hydromica, iron-bearing minerals, feldspar, rutile and so on. The content and uniformity of impurities affect the fire resistance of clay. During the heating process, a series of physical and chemical changes will take place, such as decomposition, chemical decomposition, recrystallization of steel structure anticorrosive paint, etc. The steel structure anticorrosive paint is accompanied by volume shrinkage. These changes of steel structure anticorrosive paint have an important impact on the process and properties of clay products. The clay raw materials in China, whether hard clay, soft clay or semi-soft clay, are mainly kaolinite. Therefore, the heating change of clay is essentially the heating change of kaolinite and the physicochemical reaction between kaolinite and impurity minerals. Hard clay clinker is the main raw material of clay refractories. It is usually obtained by calcining hard clay raw materials directly extracted in inverted flame kiln, rotary kiln or shaft kiln.




In addition to chemical composition, refractory production requires high volume density of clay clinker, low porosity, low water absorption and full sintering of steel structure anticorrosive paint. Therefore, the calcination temperature and holding time of steel structure anticorrosive paint have obvious influence on the quality of clay clinker. When calcination temperature is 1200-1250 degrees Celsius, clinker volume density and porosity index*. When the volume density of steel structure anticorrosive paint is greater than 1350 degrees Celsius, the volume density decreases, and the porosity of steel structure anticorrosive paint increases. At this time, a large amount of cristobalite is formed and the volume expands. At the same time, the development of steel structure anticorrosive paint in the pyrojewel layer leads to the cracking of clinker blocks. The main mineral phase of hard clay of anticorrosive paint is mullite, accounting for 35%-55%, followed by glass phase and quartz.


As a kind of protective and decorative material, coatings have been developed to today. In addition to paying attention to its environmental protection, safety, beauty and durability, people constantly give it new functions. Recently, relevant experts told reporters that functional special coatings are a kind of high-tech, multi-disciplinary cross-cutting materials, and will become the future protagonist of the paint industry. Some coatings enterprises have realized that there is not much room for the development of serious excess ordinary decorative coatings, while functional coatings will usher in a beautiful spring, and coatings enterprises have entered new fields to try their hand.