1. For construction enterprises, scientific and effective guarantee system and operation specifications should be established in the installation and protection of steel structure. For example, the project manager should be the first person responsible for safe construction and be fully responsible for the safe construction on site. The construction team leader may be the specific leader of the safe construction and be responsible for the safe construction of the construction area of the team on site. The safety civilization administrator may be designated as the full-time personnel of site safety construction, whose job is to be responsible for the education, supervision and inspection of safety construction. The safety officer of the team leader may be responsible for the safety construction in the construction area of the team and must implement specific safety construction measures. Should also be clear about the responsibility of safe construction, the responsibility of personalized, to ensure that the safe construction will be implemented in place. Must carry out the state labor protection policy, strictly carry out the company's safety, civilized construction management system and regulations.
2. For the construction site, the project manager should be responsible for the implementation of the "who construction, who is responsible for safety" system. And strengthen the "safety first" education, should adhere to the class before the disclosure, class inspection, Monday regular meeting and a series of systems. Vigorously propagandize safe construction, hang anqiu slogan and warning board in a prominent position on the construction site to remind construction personnel at any time. All personnel entering the construction site must wear safety helmet. For construction machinery, machinery and tools must be checked daily before use, especially wire rope, safety belt must be checked once a week, to ensure good condition.
3. Safety protection of on-site machinery, equipment and completed projects should be taken into account during installation. Lifting work should be stopped when wind speed reaches 10m/s, and all work should be stopped when wind speed reaches 15m/s. Workers must wear gloves when installing and handling components and plates. If the wire rope is broken during lifting, broken wire rope and entanglement should be replaced immediately. For those special types of work should hold valid certificate to work. At the end of the day, make sure the building that will be installed is properly supported to avoid accidents. Wear goggles all the time when drilling holes. Ensure the safety protection measures on site, according to the provisions of scaffolding and qualified, can be put into use. In the installation of wall panels, the operating platform of each layer of mobile scaffolding must be fixed firmly, and do a good job of anti-skid measures, pull the protective rope, buckle a series of safety measures such as safety belt. Mobile scaffolding and walls should be maintained with more than two pull contacts and two throw braces on the outside. For the throw brace must be fixed on the solid bearing capacity of the ground can be. Before moving, remove all obstacles in front of the road, fill all potholes, compaction road can move forward. Safety precautions must be reiterated to the installation worker before each task is performed. And the use of secondary safety supervision system, to achieve safety education and safety inspection policy.
