1. For the high-altitude connection of columns with beams, beams and beams, a stable and reliable temporary working platform should be set up, and a climbing ladder should be set up for each column to facilitate the construction personnel to go up and down and operate.
2. When installing horizontal components such as crane beam, pillar support, pipe gallery frame and roof beam, safety slip rope (rope diameter should not be less than 6 mm, generally 8 mm galvanized steel wire rope) should be set up to facilitate the construction personnel to fasten safety belt when moving in the air.
3. The installation and welding of diagonal braces of roof beams, installation and welding of diagonal braces between pillars, etc. should use suspension cages. Thread steel should not be used in the manufacture of suspension cages in order to avoid brittle fracture.
4. In construction, the structural platform, passageway, staircase, hole and the side of the house should be maintained, and safety measures should be taken as far as possible.
5. Lifting operation requires special person to direct, fixed post and fixed person to coordinate with the organization of lifting operation, and unauthorized overload lifting and multi-head commanding operation are strictly prohibited. Before hoisting operation, slings shall be inspected. If there are damaged or unsafe slings, they shall not be used unless repaired.
6. Structural parts transportation and inversion must be tied firmly, stacked smoothly and firmly, anti-deformation, anti-collapse, dumping, not fixed and not allowed to loosen hooks, sling must be sheathed at edges and corners;
7. Implement relevant regulations in installation operation. The lifting operation shall implement the "ten not suspended" regulations, and the upper safety belt shall be hung high and used low.
8. Operators must strictly abide by the operating rules of each post, and make corresponding signs, signals and warnings for dangerous sources in order to avoid injuries and injuries.
9. All types of work must strictly abide by the "Safety Technology Operating Regulations" promulgated by the company, and carry out safety learning and safety education for all kinds of personnel in accordance with the relevant labor laws and regulations, especially for special types of work, they must be certified to work.
10. Strengthen fire control, strictly implement the fire examination and approval system and the fire supervisor system;
11. Strictly abide by the regulations on fire prevention in construction sites, strengthen fire prevention propaganda and education, add fire fighting facilities and equipment, regularly inspect and eliminate hidden dangers. Strengthen fire awareness and prevent fire accidents.