H Section Steel Structure Processing Workshop
The V-900 single steel sheet is used for wall on normally, for more nice appearance, most clients like V-780 corrugated wave sheet.
The workshop is new H section steel processing plant in our group company. there are nine spans for this H section steel structure processing workshop.
In this H section steel structure processing workshop, there are twenty-seven cranes totally.
|Main Steel Frame||Column||Q235, Q345 Welded H Section Steel|
|Beam||Q235, Q345 Welded H Section Steel|
|Secondary Frame||Purlin||Q235 C and Z purlin|
|Knee brace||Q235 Angle Steel|
|Tie Rod||Q235 Circular Steel Pipe|
|Brace||Q235 Round Bar|
|Vertical and Horizontal Support||Q235 Angle Steel, Round Bar or Steel Pipe|
|Maintenance system||Roof Panel|| EPS Sandwich Panel / Glass Fiber Sandwich Panel /|
Rock Wool Sandwich Panel / Pu Sandwich Panel /Steel Sheet
|Wall Panel||Sandwich Panel / Corrugated Steel Sheet|
|Accessories||Window||Aluminiumn Alloy Window / PVC Window / Sandwich Panel Window|
|Door||Sliding Sandwich Panel Door / Rolling Metal Door / Personal Door|
|Live load on Roof||In 120kg/Sqm (Color steel panel surrounded)|
|Wind Resistance Grade||12 Grades|
|Structure Usage||Up to 50 years|
|Certification||CE, SGS, ISO9001:2008, ISO14001:2004|
|Finishing Options||Vast array of colors and textures available|
|Paint Options|| Alkyd paiting, two primary painting, two finish painting|
(gray paint, red paint, white paint, epoxy zinc etc.) Or Galvanized.
The V-900 single steel sheet is used for wall for a steel structure building on normally, for more nice appearance, most clients like V-780 corrugated wave sheet as wall in a steel structure workshop and warehouse.
Production flow of H section steel:
The raw material steel plate will be cut according to drawing, check the quality of cutting components, cutting surface shall not have stratification, slag, cracks and any other defect.
Check on the steel components surface curvature, height and planeness, the burr, dirt, and debirs should be cleaned up to ensure the assembly of steel components.
Choosing reasonable welding current and electrode according to the welding conditions such as groove form, welding position, thickness of steel plate.
Checking on the surface of steel components before straighting, there should not be severe depression, dents and any other damage.
Remove the rust on the surface of steel components with the blasting machine to prepare for the surface treatment.
Check the quality of the weld to ensure the products meet the standard requirements.
- Previous: Australia Required Light Steel Structure Shed Garage
- Next: Portal Frame Steel Structure Painting Workshop