1. When the plane shape is complex, the height difference of each part of the frame is large, or the floor load difference is great, seismic joint or other measures should be taken. When the anti vibration joint is set, the joint width should not be less than 1.5 times of the corresponding concrete structure building.
2. Heavy equipment should be arranged at low position.
3. When the weight of equipment is directly borne by the root and the equipment needs to pass through the floor vertically, the floor of the workshop should be separated from the equipment. The width of the joint between the equipment and the floor shall not be less than the width of the anti vibration joint.
4. The equipment on the 4th floor should not be arranged across the anti vibration joint; when the conveyor, pipeline and other long equipment must be arranged through the anti vibration joint, the equipment should have the ability to adapt to the structural deformation during the earthquake or measures to prevent cracking.
5. The working platform structure in the workshop and. the frame structure of the workshop should be arranged with anti vibration joints separated. When it is integrated with the plant structure, the elevation of the platform structure should be consistent with the corresponding floor elevation of the plant frame.
