Our common processing plants are mainly of steel structure. During the period of use, is the wrapping work of steel structure workshop very important? Let's take a look at it.
The steel structure workshop covers mainly gable, door, window, eaves, canopy and so on. The sealing of doors and windows is very important. Generally, water leakage of steel structure workshop occurs in the edge of doors and windows. If the sealant is not applied well for the first time, it is very difficult to maintain in the later stage. Because the style of the wall is quite few, its purchase and installation should be less than half of that of the door, so we should pay attention to the density Sealed to prevent water from entering. Under normal conditions, the seam of the door leaf is 1.5-25 mm, the gap is too small and tight, it is difficult to open, too large and poor sealing.
Whether there are signs of self opening and closing, such as whether the self closing of the door is consistent with the installation process of the door leaf, and whether the self closing process of the door is consistent with the requirements.
After installing the metal parts of the door leaf, the binding edge and the wall panel should be sealed. The side of the door leaf can be placed in the door bolt, so that the other half of the hinge of the door leaf flows in the hinge groove of the door bolt to realize the installation of the door leaf. But if it is a practical door, the door leaf can be indirectly installed in the position of the door frame plate, and then use the straight board line or other lines as the door line (also known as the door, door partition board or door stop), and use headless nails to flow in the door frame plate, so as to ensure the accurate position when opening the door leaf.
